Dreambox DM500+ Satellite Receiver Firmware

2970
Dreambox DM500 Plus Receiver New Software Update

Download Dreambox DM500+ Receiver Latest Software, Manual, and Upgrade Tools. The Best Dreambox receiver latest model dreambox receiver website. Dreambox receiver how does it works, and dreambox receiver price of dreambox receiver egypt, dreambox receiver dubai. Dreambox Receiver 4K and dreambox multimedia receiver New Software with latest Update. All Dreambox receiver software download from here. For more information contact us on Facebook page or twitter official account.

Dreambox DM500+ Satellite Receiver Firmware
Feature :

250 MHz PowerPC processor
Enigma, Linux operating system
Condition 2 LED
MPEG-2 Hardware decoding, DVB-S
1 x smart card reader (Dreamcrypt CA)
1 x Scart-interfaces (RGB, FBAS or S-Video)
V.24 / RS232 interface
10 / 100Mbit interface compatible Ethernet
analog modem
The interface S / PDIF for digital bit stream out (AC-3)
32 MB flash and 96 MB RAM
unlimited channel lists for TV / Radio
channel-change time <2 January
automatic scanning service
Immediately bouquet-lists
EPG (electronic program guide)
Videotext Decoder
multiple LNB-Switching control (DiSEqC)
OSD in many languages ​​and skins support
external12V food
DreamBox DM500 + Specifications

Hardware Information :

Video Options:
Input level FBAS 1 Vss +/- 0,3 dB at 75 ohms
Teletext filter in accordance with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232
Type bidirectional RS232
The flow of 115.2 kbit / s max.
Connector SUB-D-9
Function: Firmware Updates

Ethernet:
10/100 MBit compatible interface
Function: Firmware Updates

LNB Power and polarization:
1- LNB present 500mA max. ; Protection against short-circuit protected
2- LNB Supply Voltage vertical <14V without load,> 11,5V at 400mA
3- LNB Supply Voltage horizontal <20V without load,> 17,3V at 400mA
4- LNB shut-off in standby mode

Count of active satellite position:
DiSEqC 1.0 / 1.1 / 1.2 and USALS (Rotor Control)

Power consumption:

<10W / 12V

Input voltage:
DC12V +/- 15%

External supply:
Login: 110-240V AC / 50-60 Hz / 0,6A
Output: 12V = / 1A or 2A

Physical characteristics:
Ambient temperature + 15 ° C … + 35 ° C
Humidity <80%
Dimensions (W x D x H): 195 mm x 130 mm x 40 mm
Weight: 0.6 kg

External power supply:
Login: 110-240V AC / 50-60 Hz / 0,6A
Output: 12V = / 1A or 2A

Physical characteristics:
Ambient temperature + 15 ° C … + 35 ° C
Humidity <80%
Dimensions (W x D x H): 195 mm x 130 mm x 40 mm
Weight: 0.6 kg

Software and Tools
 

SW: Firmware 24-10-208               Download
Loader:  Loader Version 1.2.3.1     Download
English: User Manual English         Download
Spanish:  User Manual Spanish       Download 
Universal:  DreamUP Version 1.3.3.11 
For All DreamBox Models               Download

RMA Onloine Service                       Download
Dream Verification                          Download

Flash With Compect Flash              Download

Download Code Book
PC Software For Edit HD Recording Download

How To Upgeade Dream Box

Update Flash With Loader (Dreamup)

Power off Your box and open Loader

Select port com and select Networ or no Networ
If select Network then put IP of your PC and Box ip from yor Remot

First Press Connect Button from loader and power on your box
When Loader Connect with stb Press Flash button

Select Firmware You want to Upgrade and press open

Now Flash Upgrading will be Start and wait..

Ofter Flash Done Press ok and Disconnect the box from Loader and Exit.Restart Box and Enjoy with new Flash

Flashing DreabBox All Models with Browser Just Click

Requirments
Image File Youwant To Upgrade in *nif Extension
DHCP Server, configured boot loader, Serial Cable, terminal program
like Hyper Term.
Browser Network Cable< Cros Cable if you want to Coneect Box Directly With PC.
For More Protection Use Second Stage Loader its Not Broken and Present
If You Don,t Have a DHCP Server Then Put IP in Loader Serial Port Setup
Shut Down The Dream Box From Power Switch or Deep Stand By Mode

1-Press and Hold the Front Panel Lower Button
2-Still Hold the Button and power on your Box
3-“*** STOP ***” These Text appear,if other text appear like “/flash”.. this Then you press and hold wrong lower Button.Now Leave the Lower button you hold.The boot loader will gon in Waiting Mode.
4-Above the “*** STOP ***” text, there must be an IP address (four decimal values with a dot in between) appear. If there appears the string “dhcp” instead, the box still looking for a DHCP server. A little wait. If it does not change, does not do anything with the DHCP server. Make sure the network cable is connected, etc.
if it is not workin then set ip Usin Serial Terminal

Open Browser in your PC

1-In Address line enter “http://ip/” where ip must be replaced with the value in the LCD
2-Press Firmware Upgrade Button in the Bottom of page

Now Select Image file you want to Upgrad Only in .nfi Extension Not in img etc
Click the flash button and wait it maybe
Restart your box and new Image willbe apear

take

How to make manual ip in Loader Dreambox All Models(Just Click)

New!  Download Latest Dreambox DM500+ Receiver Software

Previous articleStrong SRT 7300 CI+ HD Satellite Receiver Software
Next articleStrong SRT 7403 HD Satellite Receiver Software

LEAVE A REPLY

Please enter your comment!
Please enter your name here