ZP.VST.V56RU.P671 LED TV BOARD SOFTWARE FREE DOWNLOAD

The ZP.VST.V56RU.P671 Combo Board is equipped with the advanced TSUMV56 Main Chipset, offering a versatile solution for display systems. Designed for screens ranging from 15″ to 29″, this board supports a variety of display formats, including up to 1920×1080 resolution. With a flexible LED Backlight ranging from 18V to 70V and 220mA to 300mA, the board caters to different screen sizes and lighting requirements.

Download firmware free for ZP.VST.V56RU.P671 LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Main Chipset: TSUMV56
LED Backlight: 18V to 70V, 220mA to 300mA
Display Format: Up to 1920×1080
Panel Supported: 15″ to 29″ Screens
Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V
Maximum Current: 3000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Factory Service Mode:

Access: Menu+1147

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• ZP-VST-V56RU-P671 1366×768 Dump File
• ZP-VST-V56RU-P671 1920×1080 Dump File

How to Update Led software with USB?

ZP.VST.V56RU.P671 Firmware All resolutions Free Download

HK-T.SP9202V02 LED TV BOARD SOFTWARE FREE DOWNLOAD

The HK-T.SP9202V02 is a straightforward ATV&DTV (DVB-T, DVB-C) Driver Motherboard specially crafted for LCD/LED TVs, targeting the Asia Pacific and the Middle East markets. As a Non-Combo Board, it requires a separate main power module and LED Backlight Inverter Circuit module, while incorporating a built-in TV Card. Packed with contemporary features, including HDMI input, USB interface, PC input, Component Input, TV, and Scart, this motherboard adheres to the latest requirements in television technology. The provided HK-T.SP9202V02 firmware files offer valuable support for technicians.

Download firmware free for HK-T.SP9202V02 LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Brand/Mark: Universal Board
Model: HK-T.SP9202V02
Main Chip:
Product: LED TV
LED Backlight: mA
Flash IC: 4 Mb
Sound Chip: R2A15122FP
Tuner IC: DVB-T, DVB-C
Screen Supported: 15-42 inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 12V DC
Service Code: Source/Input

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• 1366×768 ST LED TV
• 1366×768 SUNSTECH LED TV
• 1920×1080 SNOWA LED TV

How to Update Led software with USB?

HK-T.SP9202V02 Firmware All resolutions Free Download

ZP.VST.V56RU.PB819 LED TV BOARD SOFTWARE FREE DOWNLOAD

The ZP.VST.V56RU.PB819 is a versatile universal LED TV Board, featuring a Full HD resolution of 1920×1080. This unique combo board integrates a power supply module, ATV module, and Backlight driver module into a single PCB, streamlining functionality. Ideal for screens ranging from 32″ to 42″, it supports various display formats (4:3, 16:9 & 16:10) and employs the TSUMV56RUU-Z1 chipset for optimal performance. With connectivity options like HDMI, VGA, AV, RF, and USB, this board ensures seamless multimedia playback and software loading. The firmware files are provided for technician support.

Download firmware free for ZP.VST.V56RU.PB819 LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Model No.: ZP.VST.V56RU.PB819 (Combo Board)
Main Chipset: TSUMV56RUU-Z1
LED Backlight: 38V to 70V, 25W
Display Format: Up to 1920×1080
Panel Supported: 32″ to 42″ Screens
Aspect Ratio: 4:3, 16:9 & 16:10
TV System: PAL/SECAM/NTSC
Panel Interface: Single/Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+/Source/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade, Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V
Maximum Current: 3000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Factory Service Mode: Menu+1147

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• 1366×768 MIRROR FILE
• 1366×768 NORMAL FILE
• 1920×1080 MIRROR FILE
• 1920×1080 NORMAL FILE
• Backup Dump FILE

How to Update Led software with USB?

ZP.VST.V56RU.PB819 Firmware All resolutions Free Download

TP.V56C.PA672 LED TV BOARD SOFTWARE FREE DOWNLOAD

Experience seamless integration with the TP.V56C.PA672 analog TV board, a versatile solution combining a network driver board, power supply, and TV module. With a compact design tailored for 18.5″ to 24″ screens, this board supports resolutions up to 1920×1080, delivering crisp and vibrant visuals. Featuring a LED backlight system with a power consumption under 25W, it boasts a wide array of connectivity options including HDMI, AV, VGA, RF, and USB, ensuring multimedia playback and effortless software upgrades. The OSD language in English and factory mode accessibility make it user-friendly, while the firmware files shared provide essential support for technicians.

Download firmware free for TP.V56C.PA672 LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Brand Name: China
Model Number: TP.V56C.PA672
Backlight Type: LED
Wide Screen Support: Yes
Display Format: 720P (HD)
Screen Size: 18.5-24 inch
Support Resolution: 1920×1080
Main IC: TSUMV56RJUL-Z1
OSD Language: English
Factory Mode: Menu+1147
Firmware Name: VST56C_4MB_57.bin

How to Update Software:

Empty the U disk
Copy the corresponding resolution program (*.bin file) with the TXT file to the U disk based on your screen size

1. Connect the U disk and TV Mainboard via USB Interface
2. Connect the Keyboard and TV Mainboard
3. Connect the power supply and check the keyboard light. If flashing, wait for the light to turn green to complete the process. If not, repeat the USB connection and power supply steps. (Note: The same firmware can only be burned once.)

Boot Logo Setting:

Put your logo into the U disk
Connect your U disk with the mainboard
Find your logo in Multi-media File
Select your logo
Press No. “6” on the remote control to change to fullscreen play, then press “ok” on the remote control, at the bottom of the option items, choose “catch”. Done.

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• 1366×768 CRISTOR USB UPGRADE
• 1366×768 HYUNDAI DUMP FLASH
• 1366×768 SONY DUMP FLASH
• 1920×1080 SAMSUNG DUMP FLASH

How to Update Led software with USB?

TP.V56C.PA672 Firmware All resolutions Free Download

T.MT8223.1C LED TV BOARD SOFTWARE FREE DOWNLOAD

Model No. T.MT8223.1C – High-Performance LCD/LED TV

Download firmware free for T.MT8223.1C LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

• Main Chipset: MT8223
• Tuner: F20WT-3DDR-E
• Display Format: Up to 1080p

General Specifications:

TV System: PAL/SECAM/NTSC
Panel Interface: Single or Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+/Source/Power
Multi-Language OSD: Yes
Input/Output Ports:

HDMI, VGA, AV, USB, RF TV interface, and Earphone Out Jack
Audio Output Power:

2 x 5 Watt (8 ohm)
Panel Voltage:

+3.3V/+5V/+12V DC (jumping cap setting)
USB Port:

Yes (For Firmware Upgrade and Multimedia Playback Support)
Supported USB File Formats:

Audio (Mp3, wma, m4a/aac)
Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb)
Picture (Jpg, jpeg, bmp, png)
Text (text)
IR Control:

Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA

Firmware Upgrade:

Copy the Required Firmware/software into the FAT32 USB Disk
Plug the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
Factory Service Mode:

INPUT
MENU

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• T-MT8223-1C All Resolution

How to Update Led software with USB?

T.MT8223.1C Firmware All resolutions Free Download

T.MT8223.3B LED TV BOARD SOFTWARE FREE DOWNLOAD

Introducing Model No. T.MT8223.3B, a cutting-edge LCD/LED TV featuring the powerful MT8223 chipset, delivering an immersive display experience with up to 1080 resolution. This television boasts versatile compatibility with PAL/SECAM/NTSC TV systems and offers user-friendly functionalities through key buttons, including CH-/CH+/MENU/VOL-/VOL+, and Source/Power controls. With a sleek design and multi-language OSD, the T.MT8223.3B is designed to enhance your viewing experience.

Download firmware free for T.MT8223.3B LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Main Chipset: MT8223
Tuner: F20WT-3DDR-E
Display Format: Up to 1080
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+/Source/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, Earphone Out Jack
Audio Output Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA

Firmware Upgrade:

Copy the required firmware/software into the FAT32 USB Disk.
Plug the U disk into the Mainboard USB port of the LCD/LED TV.
Switch ON the power and wait until even the IR indicator LED stops flashing.
Done. Unplug the U-disk (It will take max 1 min to upgrade firmware).

Factory Service Mode:

Access factory service mode by pressing MENU 1147. Enhance your TV experience with the T.MT8223.3B – where innovation meets entertainment.

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• 1366×768-HYUNDAI 32-LED TV
• 1366×768-ISONIC 32-LED TV
• 1366×768-SUPRA 26-LED TV
• 1366×768-TXQ 32-LED TV
• 1366×768-UTECH 32-LED TV
• 1920×1080-BESAT 42-LED TV

How to Update Led software with USB?

T.MT8223.3B Firmware All resolutions Free Download

T.MT8223.5B LED TV BOARD SOFTWARE FREE DOWNLOAD

Introducing Model No. T.MT8223.5B 10424, a cutting-edge LCD/LED TV equipped with the powerful MT8223 chipset for seamless performance. With a versatile tuner (F20WT-3DDR-E) and support for up to 1080 display resolution, this TV delivers a superior viewing experience. The T.MT8223.5B boasts PAL/SECAM/NTSC compatibility, offering a dynamic range of TV systems. Its user-friendly interface includes key button functions for effortless navigation, and a multi-language OSD ensures accessibility.

Download firmware free for T.MT8223.5B LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Main Chipset: MT8223
Tuner: F20WT-3DDR-E
Display Format: Up to 1080
TV System: PAL/SECAM/NTSC
Panel Interface: Single/Dual channel LVDS
Key Buttons: CH-/CH+/MENU/VOL-/VOL+/Source/Power
OSD: Multi-language
Ports: HDMI, VGA, AV, USB, RF TV interface, Earphone Out Jack
Audio Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Firmware Upgrade, Multimedia Playback
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Remote Control)

Electrical Parameters:

Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (Motherboard only)
Maximum USB Current: 500mA

Firmware Upgrade:

Copy firmware to FAT32 USB Disk
Plug U disk into Mainboard USB port
Power ON and wait until IR indicator LED stops flashing
Done. Unplug U-disk (Upgrades in max 1 min)
Factory Service Mode:
Access by pressing MENU 1147.

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• ERISSON 19-inch LED TV
• 1366×768 POLAR LED TV
• 1366×768 PRECISION 32-inch LED TV
• 1366×768 TECHNO 26-inch LED TV
• 1920×1080 SANKEY 22-inch LED TV

How to Update Led software with USB?

T.MT8223.5B Firmware All resolutions Free Download

T.VST26.12C LCD TV BOARD SOFTWARE FREE DOWNLOAD

Model No. T.VST26.12C 11331, 11412 – High-Performance LCD/LED TV Mainboard

Download firmware free for T.VST26.12C LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Main Chipset: Employs TSUMV26KE-LF and TSUMV26KU-LF for powerful processing
Tuner: Features ET-6T1E-EF108WR3 CDT-3FP212-31 ET-6T1E-LF-108W-A for superior tuning
Display Format: Supports up to 1080 resolution for crisp visuals

General Specifications:

TV System: PAL/SECAM/NTSC compatibility for versatile usage
Panel Interface: Single or Dual channel LVDS options for flexible connectivity
Key Button Functions: Convenient CH-/CH+/MENU/VOL-/VOL+Source/Power controls
Multi-Language OSD: User-friendly interface with support for multiple languages
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out Jack for extensive connectivity
Audio O/P Power: 2 x 5 Watt (8 ohm) for immersive audio experience
Panel Voltage: +3.3V/+5V/+12V DC (adjustable with jumping cap settings)
USB Port: Enables firmware upgrades and multimedia playback
USB File Format Support: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Easily controllable via included remote control

Electrical Parameters:

Working Input Voltage: DC +12 Volt for efficient power usage
Maximum Current: 2000mA (Without Panel) for optimized performance
Standby Power: <0.2W (for the motherboard only) for energy efficiency
Maximum Current for USB: 500mA for reliable USB performance

Firmware Upgrade:

Simple process involving copying required firmware/software to FAT32 USB Disk
Plug the U disk into the Mainboard USB port
Switch ON the power and wait until the IR indicator LED stops flashing
Unplug the U-disk; firmware upgrade completes in max 1 min
Factory Service Mode:

Accessible by pressing MENU 1147 for convenient service and adjustments.

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• ROLSEN 16-inch LED TV
• STYLANCE 23-inch LED TV
• TELSTAR 24-inch LED TV
• SATURN 15-inch LED TV
• STYLANCE 22-inch LED TV
• TECHNO 22-inch LED TV

How to Update Led software with USB?

T.VST26.12C Firmware All resolutions Free Download

CV3393BH-U32 LED TV BOARD SOFTWARE FREE DOWNLOAD

The CV3393BH-U32 is a versatile ATV Drive Board meticulously crafted for LCD/LED TVs, catering specifically to the discerning markets of Asia Pacific and the Middle East. It stands out as a Combo Board, seamlessly integrating the main power module, LED Backlight Inverter Circuit, and ATV Card into a single, efficient motherboard. Packed with cutting-edge features, it boasts HDMI input, USB interface, PC input, Component Input, TV capabilities, and a convenient Headphone jack. This board caters to the latest technological demands, ensuring a seamless viewing experience.

Download firmware free for CV3393BH-U32 LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Brand/Mark: Universal HD Three-in-One Board
Model: CV3393BH-U32
Main Chip: MSD318LUC
Product: LED TV
LED Backlight Capacity: 300-350mA
LED Backlight Voltage: 72~79V
Flash IC: 2/4Mb
Screen Supported: 32-65 inch
Resolution: Up to 1920×1080
Panel Voltage: 12V
Power Input: 220V AC
Tuner: Included
Mirror Option: Yes
Service Code: Available

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• FRIGIDAIRE 32 inch LED TV
• IQ 32 inch LED TV
• SANSUI 32 inch LED TV
• WESTINGHOUSE 32 inch LED TV

How to Update Led software with USB?

CV3393BH-U32 Firmware All resolutions Free Download

T.VST26.7A LCD TV BOARD SOFTWARE FREE DOWNLOAD

Introducing Model No. T.VST26.7A 10093, a cutting-edge LCD/LED TV motherboard featuring the advanced TSUMV26KE-LF chipset for exceptional performance. Immerse yourself in a versatile TV experience with PAL/SECAM/NTSC compatibility and a display format of up to 1080, delivering crisp visuals. The TV boasts a user-friendly interface with key button functions for easy control, along with a multi-language OSD for a personalized viewing experience.

Download firmware free for T.VST26.7A LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.

 Specifications:

Main Chipset: TSUMV26KE-LF
Tuner: TDQ-ATF27W7-F, ET-6T1E-LF-108W-A, ET-6T1E-EF108WR3
Display Format: Up to 1080
Sound Chip: 1517
TV System: PAL/SECAM/NTSC
Panel Interface: Single/Dual Channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+/Source/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, Earphone Out Jack
Audio Output Power: 2 x 5 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade, Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Firmware Upgrade: Easily upgrade firmware by copying required files to a FAT32 USB Disk and following simple steps. Factory Service Mode: Access by pressing MENU 1147. Upgrade with confidence and enjoy an enhanced TV experience.

Note:

The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.

• AKAI 19 inch LED TV
• AKAI 22 inch LED TV
• AKAI 24 inch LED TV
• AKAI 42 inch LED TV
• HONDA 22 inch LED TV
• HONDA 24 inch LED TV
• HYUNDAI 19 inch LED TV
• HYUNDAI 24 inch LED TV
• IZUMI 15 inch LED TV
• STYLANCE 23 inch LED TV

How to Update Led software with USB?

T.VST26.7A Firmware All resolutions Free Download