T.MT8223.1C LED TV BOARD SOFTWARE FREE DOWNLOAD
Model No. T.MT8223.1C – High-Performance LCD/LED TV
Download firmware free for T.MT8223.1C LCD/LED Board with the latest update. Here you download LED software for all models and sizes. Android Apps, Light Flow, NotifyBuddy, player, and others Led Download. If you can’t find your desired software, please get in touch with us on Twitter or Facebook page.
Specifications:
- Main Chipset: MT8223
- Tuner: F20WT-3DDR-E
- Display Format: Up to 1080p
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single or Dual channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+/Source/Power
Multi-Language OSD: Yes
Input/Output Ports:
HDMI, VGA, AV, USB, RF TV interface, and Earphone Out Jack
Audio Output Power:
2 x 5 Watt (8 ohm)
Panel Voltage:
+3.3V/+5V/+12V DC (jumping cap setting)
USB Port:
Yes (For Firmware Upgrade and Multimedia Playback Support)
Supported USB File Formats:
Audio (Mp3, wma, m4a/aac)
Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb)
Picture (Jpg, jpeg, bmp, png)
Text (text)
IR Control:
Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Firmware Upgrade:
Copy the Required Firmware/software into the FAT32 USB Disk
Plug the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
INPUT
MENU
Note:
The software provided is a backup dump, writable by a programming tool.
Mr Dish Team is not responsible for damage/loss during firmware upload/download.
Check the mainboard before software installation.
If inexperienced, read instructions before loading/installing software/firmware or dump files.
- T-MT8223-1C All Resolution
