TNM7000 ECU-KIT CAR PROGRAMMER NEW UPDATE

377

TNM7000 ECU-KIT CAR PROGRAMMER LATEST SOFTWARE & FIRMWARE UPDATE


Download the latest software update for the TNM 7000 7000E ECU-KIT Car Programmer for free download. This programming tool is exclusively developed by TNMELECTRONICS. Explore comprehensive specifications of the TNM 7000 7000E ECU-KIT Car Programmer.. Download Flash files and other programmer file. Latest Update about Digital receiver and TV channel Like our facebook page.

TNM 7000E 5-in-1 CAR Programmer

Universal Programmer Empowering 25,000 Devices (Flash NOR/NAND/SPI, EEPROM, MCUs, CPLD, and EMMC). ECU-KIT Software Revolutionizes ECU, Immobilizer, and Dashboard Programming via JTAG/ISP/BDM/GPT, Alongside Convenient OBD Cable Downloading. Elevate Performance with ECU Remap Software, Offering Precise ECU Tuning and Checksum Calculation. Dive into Advanced CAN Analyzer Software, Essential for Diagnosing Car CAN-BUS Issues and Pioneering Reverse Engineering. Experience High-Performance with an 80 Msps/20 MHz – 1 Channel Digital Oscilloscope, Accompanied by an Optional Accessory Board and an 8-Channel 200 Msps Logic Analyzer. Stay Ahead in Technology!

TNM7000 ECU-KIT CAR PROGRAMMER NEW UPDATE

Specifications:

Revolutionize car programming with our Universal device, offering unparalleled support for OBD/JTAG/ISP programming of major units such as Bosch, Delphi, Continental, Siemens, Denso, Mitsubishi, Valeo, Sagem, Magneti Marelli, and more. Our software includes wiring diagrams and checksum calculation for seamless operation.

This versatile tool is designed to handle a wide array of MCUs found in Car ECUs, Immobilizers, BCM, UCH, ABS, AirBag systems, including:

Full Motorola (Freescale) 9S12 series with unsecure capability
Infineon Tricore TC17xx series with password reading for numerous ECUs
Hitachi SH705x read and write support
Full Microchip PIC & DSPIC compatibility
Full Atmel microcontrollers support
NXP PCF79xx remote chips
Renesas R5F10Dxx (Secured EEPROM read + Write)
Support NEC upd70F3xxx series
NEC UPD78F0828-937-949 Dashboard
NEC UPD78K0 Dashboard External/Internal EEPROM Read write through MBUS
Infineon XC233x, XC236x MCUs used in Airbags
Fujitsu MB91F06x & MB91F5xx MCUs used in Dashboards
ISP Protocols supported include:

Tricore Boot

Bosch GPT (without ECU opening)
ST10F Boot Mode (Kline & ISP)
Motorola BDM with 9S12 Glitch security removal capability
Denso 76F00xx NBD
MPC5XX BDM
JTAG MPC5XXX
JTAG SPC56xx
Mitsubishi Boot
NEC MBUS
NXP FS32K142/144/146
Renesas RH850
OBD Downloader and Reading with Checksum calculation for various units:

Bosch: BoschMe7, BoschM7.8, Bosch Me7.9.7, Bosch Me17 China, Bosch Me17.9.7, Bosch EDC17C53, Bosch EDC17C39, and more.

Delphi: Delphi MT92, Delphi CRD2.35, Delphi MT86, Delphi MT38, Delphi MT60, Delphi MT80, and more.

Continental: Hyundai & Kia SIM2K250, SIM2K260, SIM2K251, Sim2K-141, Sim2K-24x, Sim2K-34x, Renault EMS3132, and more.

Mitsubishi: Mazda3/6 (E6T6xxxx), Mazda3 (E6T5xxx)

SAGEM: Renault S3000, Peugeot S2000

Valeo: Peugeot PL4, J34, J35

Remap and ECU Tuning capabilities include Remap Tables, 2D & 3D Views, and Checksum calculation.

The package includes free software upgrades and is compatible with Windows XP/VISTA/7/8/10 (32,64 bits).

Our programmer software supports 25,000+ devices, covering Flash Memory (Parallel/Nand/Serial), EPROM, EEPROM, Serial EEPROM, Microcontroller, NVRAM, FRAM, CPLD, PLD.

Features:

48-Pins ZIF Socket with Pin Continuity tester
10-Pins ISP/JTAG Connector
USB 2.0 High Speed
Read EMMC/Nand Flashes with 12Mbyte/Sec
Reading Serial Flash memory with 8 Mbit/Sec
Auto detection of all flash Memories/Microcontrollers with Device ID
Multiple Programming possible by attaching 2 or more Programmers to one PC
Low-cost adaptors, works with many different adaptors from other programmers.
Upgrade your programming capabilities with our comprehensive and efficient tool, offering top-notch features and support for a wide range of automotive systems.

TNM 5000-7000-7000E-7000A Version 11.07 Programmer Software

MX77L12850F / GD25VQ32C / GD25VQ16C / W25R128JV / XM25RU256C / GD25R256E / MC9S08QG4 / MC9S08QG8 added to Model 5000 / 7000.
Cypress S6J3001LSJ Flash Programming is added to Model 7000E / 7000A-OPT16.
Software bug after NVRAM Select in recent versions removed

Download TNM7000 ECU-KIT CAR PROGRAMMER New Software Update
Previous articleMEDIA MX 444 PLUS 1506HV 4M NEW SOFTWARE
Next articleNEXT MINIX HD BLACK 2 PLUS SOFTWARE UPDATE

LEAVE A REPLY

Please enter your comment!
Please enter your name here